Demon Bike Bits

Tail Risers

As the specialist for tail riser Team Metisse have developed the possibly the world's largest and most complete range.

Metisse Tail Riser's will optimise your bike as follows:

+ better handling

+ better feedback from rear suspension

+ more grip on the rear wheel

+ more weight on the front wheel

+ less kickback

+ and much better look with raised tail

+ tested and recommended by international motorcycle journalists

+ race proven

Material

Depends on model: stainless steel, steel or high tensile aluminium.

How to fit

Easy to fit, instructions are included.

Kit includes

Tail riser, nuts and bolts (if necessary), instructions in english and german.

German TÜV approval

Yes.

Notes

Big improvement for small money.

BMW Tail Risers - Replacement Paralever

Larger picture

New: the Paralever pushrod, which was exclusively designed for Metisse's 160 PS strong Turbo-Boxer is now available for your bike:

Metisse have developed this exclusive part for their incredible Turbo-Boxer. Precise machined from a 4 kilo block of finest aircraft aluminium. The result is a beautiful, ca. 900 gram light part. For perfect finish and it is anodised in various colours, and fitted with a new, original BMW bearing (the original BMW paralever-pushrod weight is ca. 650 Grams).

Our Paralever pushrods have the following advantages:
- you can lift the tail of your BMW, so that it handles much better. Very good for heavy riders or rides with passenger and luggage, because the suspension then is under high compression and the handling gets worse. The higher rear end brings more weight to the front end. The lift of the tail, that we mention in the list below, is measured on brandnew bikes at the end of the tail.

- Our pushrods are 3 times stronger than the original part, wich is made from pressed aluminium sheet.

- We have designed our pushrod to protect the rear mounting of the paralever from underneath. This is a must if you take your bike Offroad (GS models), but also a protection on the road against stones, split, etc.

- Our pushrods have a very good finish, look much better and more technical than original, and give your bike a more exclusive look.

Material
CNC machined aircraft aluminium. Anodised. The front bearing is a new original BMW part, all this guarantees a very long life.

How to fit
Easy to fit.

Kit includes
Paralever pushrod, ready to fit. Bearing is already fitted. Mounting bolt.

Model		Part No.	Part No.	Part No.
		Silver	Blue	Black
R 1100 S, April 2000-	Nil	52bm03si	52bm03bl	52bm03sch
R 1100 S, April 2000-	20 mm	52bm01si	52bm01bl	52bm01sch
R 1100 S Boxer Cup Replica	Nil	52bm01si	52bm01bl	52bm01sch
R 1100 GS	Nil	52bm01si	52bm01bl	52bm01sch
R 1100 GS	20 mm	52bm02si	52bm02bl	52bm02sch
R 1100 R	Nil	52bm03si	52bm03bl	52bm03sch
R 1100 R	20 mm	52bm01si	52bm01bl	52bm01sch
R 1100 RT	Nil	52bm03si	52bm03bl	52bm03sch
R 1100 RT	20 mm	52bm01si	52bm01bl	52bm01sch
R 1100 RS	Nil	52bm03si	52bm03bl	52bm03sch
R 1100 RS	20 mm	52bm01si	52bm01bl	52bm01sch
R 1150 GS	Nil	52bm01si	52bm01bl	52bm01sch
R 1150 GS	20 mm	52bm02si	52bm02bl	52bm02sch
R 1150 GS Adventure	Nil	52bm01si	52bm01bl	52bm01sch
R 1150 GS Adventure	20 mm	52bm02si	52bm02bl	52bm02sch
R 1150 R + Rockster	Nil	52bm03si	52bm03bl	52bm03sch
R 1150 R + Rockster	20 mm	52bm01si	52bm01bl	52bm01sch
R 1150 RS	Nil	52bm03si	52bm03bl	52bm03sch
R 1150 RS	20 mm	52bm01si	52bm01bl	52bm02sch
R 1150 RT	Nil	52bm03si	52bm03bl	52bm03sch
R 1150 RT	20 mm	52bm01si	52bm01bl	52bm01sch

Honda Tail Risers

Larger picture

Optimise your bike's look and handling with Metisse Tail Risers. Note: Prices may vary by model.

CBR 600F, 99-	30 mm	3
CBR 600 FS, 01-02	30 mm	3
CBR 900 RR SC28, 92-95	25 mm	1
CBR 900 RR SC33, 96-99	35 mm	1
CBR 900 RR SC44, 00-01	25 mm	1
CBR 900 RR, 02-03	25 mm	1
CBR 1000 RR, 04-	TBA
VTR 1000 F	30 mm	3
VTR 1000 SP-1 / SP-2	25-30 mm	4
CBR 1100 XX	30 mm	3

Kawasaki Tail Risers

110052

Larger picture

Optimise your bike's look and handling with Metisse Tail Risers. Note: Prices may vary by model.

ZX-6R, 94-97	30 mm	2	110052
ZX-6R, 98-01	30 mm	2	110035
ZX-636, 02	30 mm	2
ZXR 750 H1-2, 89-90	35 mm	2	110034
ZR-7	30 mm	2	110053
ZX-9R, 94-97	30 mm	2	110054
ZX-9R, 98-01	30 mm	2	110035
ZX-9R, 02	30 mm	2	110054

Suzuki Tail Risers

Larger picture

Optimise your bike's look and handling with Metisse Tail Risers. Note: Prices may vary by model.

RF 600	30 mm	2	110036
GSF 600 / S Bandit, 95-	33 mm	2	110038
GSX/R 600, 96-00	25 mm	2	110034
GSX/R 600, 01-	27 mm	2	110044
GSX 600 F, 98-	30 mm	2	110061
SV 650 N/S, 98-02	32 mm	2	110043
SV 650 N/S, 03-	31 mm	2	110062
GSX 750 F, 98-	30 mm	2	110061
GSX/R 750, 88-91	35 mm	2	110041
GSX/R 750, 94-95	35 mm	2	110040
GSX/R 750, 96-99	25 mm	2	110034
GSX/R 750, 00-	27 mm	2	110044
GSX 750 Inazuma, 98-	35 mm	5	110055
RF 900	30 mm	2	110036
SV 1000 N/S, 03-	25 mm	2	110063
GSX/R 1000, 01-	25 mm	2	110044
GSX/R 1100, 89-92	35 mm	2	110041
GSX/R 1100, 95-98	35 mm	2	110040
GSF 1200 / S Bandit, 95-	38 mm	2	110035
GSX 1200 Inazuma, 98-01	35 mm	5	110055
GSX 1300 R Hayabusa	28 mm	2	110045
GSX 1400	40 mm	5	110055

Yamaha Tail Risers

Larger picture

Optimise your bike's look and handling with Metisse Tail Risers. Note: Prices may vary by model.

FZR 600, 89-93	30 mm	2	110034
FZR 600R, 94-95	30 mm	2	110036
YZF 600 Thunder Cat	30 mm	2	110036
FZS 600 Fazer	35 mm	2	110042
R-6, 98-02	25 mm	6	110048
YZF 750 R/SP	25 mm	2	110037
TRX 850	33 mm	2	110035
FZR 1000, 87-88	33 mm	2	110034
FZR 1000 Exup, 89-95	45 mm	2	110039
YZF 1000 Thunder Ace	40 mm	2	110039
R-1, 98-01	25 mm	6	110046
R-1, 02	25 mm	6
FZS 1000 Fazer	28 mm	2	110051
XJR 1200 / XJR 1300 / SP	40 mm	5	110050