Grip Lock is designed to lock on to the throttle handgrip and the Brake lever, providing highly visible and effective security. Easily installed and stowed while riding.
Easy and quick to put in place Available in Yellow, Red, Green, Pink and Black High visibility Fits hand grips from 27 - 38 mm Dia. 98% of handgrips ) Three different sized inserts are provided to allow for various grip diameters Locks on to throttle or left hand grip holding brake or clutch lever. Four locking positions for front brake or clutch. Heat treated steel reinforcing bars molded into the unit. ( Hacksaw resistant ) Anti drill lock barrel. 50,000 different key combinations. Manufactured from Hi impact vehicle grade and UV resistant material. Light weight ( only weighs 320 gms ) Small in Size ( can fit into your pocket ) The Grip Lock System has been designed to be a highly visible theft deterrent which prevents the twist grip on your Motorcycle, ATV or other recreational vehicles from operating.
The Grip Lock is Highly VisibleImmobilise the twist grip and apply the brake.
Once fitted, the Grip Lock will also apply pressure to your brake lever as well ensuring that your motorcycle is held safe when parking on an incline (if adjusted to do so).
Never forget it's on.
Unlike disk locks, the placement of the Grip Lock prevents the rider from forgetting it's in place thus eliminating the risk of damage to the motorcycle.
Easy to Use.
The Grip Lock has been designed to be easy to use and does not require the key to lock the device. Simply place it over the twist grip and brake lever, close the two halves together and push the lock in to secure your motorcycle.
Casing.
The casing of the Grip Lock is high pressure injection moulded with 30% glass filled nylon designed to resist high impact levels.
The casing also contains 3 3.1mm hardened steel rods impregnated into the moulding. These rods are much harder than a hacksaw blade preventing would be thieves from simply sawing the Grip Lock off.
Hinge Pin.
5mm stainless steel machined to house a locating pin. Locating fixing pins for hinge and lock barrel are stainless steel.Lock barrel mounting platform protected by raised ring border to resist forcible removal.
"It's just harder..OK!!"
Constructed from smooth stainless steel, the Ground Hog 6 presents a thief’s worst nightmare. Fixed to the ground with security bolts covered by a non-drill, non-cut rotating cover, once a chain is attached there is no way through it! This attractive looking, heavy duty ground anchor is easy to install and is an invaluable part of the security for your bike.
SUPERLINK - The ultimate in high security chain
Chain
Sleeving
Lock - E.C. Series 130
Radial cylinder key works both ways up.
Product codes & descriptions Strength Price rating SK1312 Superlink 1.2m x 13mm Fabric cover + Close shackle lock + Free lock carrier 10 $257.10 SK1315 Superlink 1.5m x 13mm Fabric cover + Close shackle lock + Free lock carrier 10 $268.90 SK1320 Superlink 2.0m x 13mm Fabric cover + Close shackle lock + Free lock carrier 10 $304.20 inc.GST
Product codes & descriptions
Strength
Price
rating
SK1312
Superlink
1.2m x 13mm
Fabric cover
+ Close shackle lock
+ Free lock carrier
10
$257.10
SK1315
1.5m x 13mm
$268.90
SK1320
2.0m x 13mm
$304.20
inc.GST